Monday, April 23, 2012

Assembling a PC

Last week we were given a class activities to assemble a PC components into its case. This classwork activities were to be done in a group of 4 to 5 person.

Below is the PC case and its components.



















First we attached the USB port and connected the USB cable to the circuit board. The USB cable is the black colored cable.



Then the Speaker and its cable.


Followed by the case switch cable.




Next is the CPU fan.



Then the diffuser fan





Followed by Hard Disk drive



 This power cables is to be connected to the hard disk. There are two pin, either the two of them can be use. For the class activities we choose to use the middle one.


The Hard Disk Cable with both ends that have pins slot.



Now for the DVD Drive



 The DVD drive cable that will be connected to the circuit board.

The power cable from the power adapter also must be connected to the DVD Drive.


Next is the Diskette driver





 Diskette drive power cable from the power adapter

Diskette drive IDE cable connected from the drive to the circuit board


Next is the Front Panel



Then the Mother board power cable


Followed by Random Access Memory(RAM)




and Wireless Card

After attaching the wireless card to the PCI slot. A bracket for holding the card is necessary to be installed from outside of the case.



Finally the wireless card antenna.

With that all the necessary components have been installed. The only thing left to do is to screw the case cover.

Sunday, April 22, 2012

Tools name and Functions

Below are the tools that can be use to open a pc.
Name: 8" Wire Cutter
Function: For cutting wire or to strip the wire from its insulator.


 Name: 6" Adjustable wrench
Function: To loosen or tighten Hex nuts


 Name: 5" Needle Nose Pliers
Function: For cutting thin wires or to grip small object


 Name: Reverse Action Tweezers
Function: For holding small items to be glued  into small places


 Name: Tweezers
Function: For picking up or manipulating small objects that are too small for human hands


 Name: Three Claw Parts Retriever/Extractor
Function: To grab small or retrieve small objects


 Name: IC Extractor
Function:  For extracting chip from the motherboard


Name: IC Inserter
Function: To insert chip into a circuit board

Name: Soldering Iron
Function: To melt solder reel


Name: Solder Reel
Function: To be molten so that current can flow through


Name: Screwdriver
Function: To loosen or tighten a screw
Shape: Flat (-) and phillips (+)
Flat screwdriver size available: 1/4" 3/16" 1/8"
Phillips screwdriver size available: #2 #1 #0


Name: Nut Driver
Function: To loosen or tighten Hex nut
Size Available: 1/4" 3/16"


Name: Reversible T10/T15 Torque
Function: To loosen or tighten similar shape screw


Name: Spare Parts Tube
Function: To place spare parts